Peroni recipe
- ArtCox
- Brewmaster
- Posts: 334
- Joined: Sun Jan 09, 2011 3:13 pm
- Location: Madisonville, Ky
Peroni recipe
Had a few of these at Cordoba's a while back, pretty good beer. Any one got a recipe for a clone of this.
"If you can't stand the hops, get out of the brewhouse!"
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
- Michael Erwin
- Brewmaster
- Posts: 577
- Joined: Thu May 15, 2008 2:01 pm
Re: Peroni recipe
This is the beer they serve as the Italian beer alternative at many Olive Gardens. I haven't tried to brew it though, so I don't have a recipe.
I would think, European light lager: all pilsner malt at nearly a session-level, heavy on the adjuncts, like rice or maybe corn (probably rice, though), a very moderate bitterness with little to no hop flavor or aroma, and an extremely clean lager yeast and fermentation.
I would think, European light lager: all pilsner malt at nearly a session-level, heavy on the adjuncts, like rice or maybe corn (probably rice, though), a very moderate bitterness with little to no hop flavor or aroma, and an extremely clean lager yeast and fermentation.
Michael Erwin
------------
Some people say the glass is half empty.
Some say it's half full.
I just want to know who's drinking my damn beer!
------------
Some people say the glass is half empty.
Some say it's half full.
I just want to know who's drinking my damn beer!
- ArtCox
- Brewmaster
- Posts: 334
- Joined: Sun Jan 09, 2011 3:13 pm
- Location: Madisonville, Ky
Re: Peroni recipe
I found this recipe but I don't know boil times or addition schedule. Any help out there?
Peroni Birra:
23 litres = 6 gallons
Original gravity 1.044
3250g Crushed lager malt = 7 lbs
125g Crushed crystal malt = 0.27 lbs
750g Flaked rice = 1.6 lbs (? flaked maize instead?)
15ltrs water for 'lager' brewing
5ml Irish moss
60+30g Saaz hops = 1 oz
15g Gelatine
60g lager yeast
Peroni Birra:
23 litres = 6 gallons
Original gravity 1.044
3250g Crushed lager malt = 7 lbs
125g Crushed crystal malt = 0.27 lbs
750g Flaked rice = 1.6 lbs (? flaked maize instead?)
15ltrs water for 'lager' brewing
5ml Irish moss
60+30g Saaz hops = 1 oz
15g Gelatine
60g lager yeast
"If you can't stand the hops, get out of the brewhouse!"
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
- john mills
- Brewmaster
- Posts: 1378
- Joined: Mon Jun 25, 2007 2:40 pm
- Location: Near the Zoo
Re: Peroni recipe
Lager malt, I would say is Pilsner malt. Recipes with significant proportions of pilsner malts generally recommend 90 minute boils to drive off the DMS. Make sure to adjust your preboil volume to accommodate the added boil time (1/2 gal extra should be a close starting point).ArtCox wrote:I found this recipe but I don't know boil times or addition schedule. Any help out there?
The hops on this lager would be a single addition at 60 minutes before the end of boil.
You gonna buy one, or be one?
.....I'm gonna be one!
.....I'm gonna be one!
- ArtCox
- Brewmaster
- Posts: 334
- Joined: Sun Jan 09, 2011 3:13 pm
- Location: Madisonville, Ky
Re: Peroni recipe
John,john mills wrote:Lager malt, I would say is Pilsner malt. Recipes with significant proportions of pilsner malts generally recommend 90 minute boils to drive off the DMS. Make sure to adjust your preboil volume to accommodate the added boil time (1/2 gal extra should be a close starting point).ArtCox wrote:I found this recipe but I don't know boil times or addition schedule. Any help out there?
The hops on this lager would be a single addition at 60 minutes before the end of boil.
I wonder what Crystal Malt they used. 10L, 40L ?? it didn't specify.
"If you can't stand the hops, get out of the brewhouse!"
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
- john mills
- Brewmaster
- Posts: 1378
- Joined: Mon Jun 25, 2007 2:40 pm
- Location: Near the Zoo
Re: Peroni recipe
Peroni is a pale lager, so I would say the lightest crystal malt you can easily get. 10 - 20L.
Here is my personal warning:
Peroni is a mass-produced imported beer that is filtered, and probably heat pasteurized. Your homebrewed version will never taste like the commercial version unless you also abuse it in the same manner.
Here is my personal warning:
Peroni is a mass-produced imported beer that is filtered, and probably heat pasteurized. Your homebrewed version will never taste like the commercial version unless you also abuse it in the same manner.
You gonna buy one, or be one?
.....I'm gonna be one!
.....I'm gonna be one!
- ArtCox
- Brewmaster
- Posts: 334
- Joined: Sun Jan 09, 2011 3:13 pm
- Location: Madisonville, Ky
Re: Peroni recipe
You are probably correct on that John, I just wanted to try it.
The Sierra Pale Ale (Sierra Nevada Clone) we made isn't what we expected, way to Hoppy for me and Elizabeth, considering dumping it unless you know someone who want's to trade an empty keg for a full one.
The Sierra Pale Ale (Sierra Nevada Clone) we made isn't what we expected, way to Hoppy for me and Elizabeth, considering dumping it unless you know someone who want's to trade an empty keg for a full one.
"If you can't stand the hops, get out of the brewhouse!"
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
- Dutch
- Brewmaster
- Posts: 1248
- Joined: Wed Jul 11, 2007 8:54 pm
- Location: Evansville
Re: Peroni recipe
Hold on to that "HOPPY STUFF" we can use it at SWIRCA. Somehow we will get you a corny!
Dutch deHaan • OVHA Board Member
Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?
Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?
- ArtCox
- Brewmaster
- Posts: 334
- Joined: Sun Jan 09, 2011 3:13 pm
- Location: Madisonville, Ky
Re: Peroni recipe
You got it.Dutch wrote:Hold on to that "HOPPY STUFF" we can use it at SWIRCA. Somehow we will get you a corny!
"If you can't stand the hops, get out of the brewhouse!"
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,
-
- Brewmaster
- Posts: 162
- Joined: Thu Feb 23, 2006 8:37 pm
- Contact:
Re: Peroni recipe
Have a care there -- "lager malt" and "pilsner malt" are not interchangeable. Pilsner malt, if it really is Pilsner malt, will be less modified than other lager malts and will give low extract and probably starch haze unless decoction mashed. You can test this yourself -- pilsner malt has steely ends and modern lager malts normally do not.
Naturally, this isn't a hard and fast rule, as I've found EuroPils to mash just fine without decoction, but I get better extract when I do at least a single decoction.
Six row lager malt and rice (precooked) will make a nice light larger. Simmer the rice for 45 min or so in excess water and cool to at least mash temp, then add to the mash when you mash-in. No residue, it vanishes during the mash. Regular long grain is fine, I'd not recommend Basmati or Jasmine rice except for an experiment!
Frement cold (not more than 50F) and lager at 35F for a month. Won't need much lagering, it should nearly ferment out in the primary.
In fact, this would be a good beer to make in the next couple weeks for the SWIRCA event.....
Peter
Naturally, this isn't a hard and fast rule, as I've found EuroPils to mash just fine without decoction, but I get better extract when I do at least a single decoction.
Six row lager malt and rice (precooked) will make a nice light larger. Simmer the rice for 45 min or so in excess water and cool to at least mash temp, then add to the mash when you mash-in. No residue, it vanishes during the mash. Regular long grain is fine, I'd not recommend Basmati or Jasmine rice except for an experiment!
Frement cold (not more than 50F) and lager at 35F for a month. Won't need much lagering, it should nearly ferment out in the primary.
In fact, this would be a good beer to make in the next couple weeks for the SWIRCA event.....
Peter
- BM1
- Brewmaster
- Posts: 378
- Joined: Wed Jan 30, 2008 11:40 pm
- Location: Evansville,IN
Re: Peroni recipe
Where does the Pilsner Malt come from that we get from Jack?I haven't used any,yet,but I would like to know what I have.ProMash and/or BeerSmith only have a few listings for Pilsner...none seem right.
I haven't had achance to brew,lately,anyway ( my %$#^$ng job is killin' me! ),too hot.Missed two meetings in a row because I was working late.
I haven't had achance to brew,lately,anyway ( my %$#^$ng job is killin' me! ),too hot.Missed two meetings in a row because I was working late.
You gonna stop whinin' 'bout that beer,or you gonna send it to me?
Friends don't let friends brew drunk!
Signed:Steve Sluder.
Friends don't let friends brew drunk!
Signed:Steve Sluder.