How about an Equipment Thread?!
-
SkyBrew
- Brewmaster
- Posts: 1641
- Joined: Mon May 31, 2010 11:47 pm
-
KennyPurcell
- Brewmaster
- Posts: 447
- Joined: Sat Oct 01, 2011 1:06 pm
Re: How about an Equipment Thread?!
I don't know what circles you run in Sky but that sounds dirty to me.SkyBrew wrote:we should have a carboy spigot porting party
Kenny Purcell • Former OVHA President (2016)
Up Next:
Fermenting/Aging: Citra/Amarillo DIPA
On Tap: Cider, Dry Stout, 2016 OVHA Barrel Aged RIS & OMDG
Bottled: Squatch Crotch American Imperial Stout 2014, 2014 OVHA FES, Ass Crack of Don Bourbon Stout (Don't drink and name your beers), Giraffe Head Coffee Stout, & 2013 OVHA Barrel Aged Old Ale, St. Cyril's Strong Ale
Up Next:
Fermenting/Aging: Citra/Amarillo DIPA
On Tap: Cider, Dry Stout, 2016 OVHA Barrel Aged RIS & OMDG
Bottled: Squatch Crotch American Imperial Stout 2014, 2014 OVHA FES, Ass Crack of Don Bourbon Stout (Don't drink and name your beers), Giraffe Head Coffee Stout, & 2013 OVHA Barrel Aged Old Ale, St. Cyril's Strong Ale
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
Added a rack to my bottle cellar! Kept around 52'F.
You do not have the required permissions to view the files attached to this post.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
For my BIABers out there, these are on sale right now at Menards for $14.99!! Normally like $22 I believe. Hung mine from the rafters in the garage. Works great!! (Auto-locks as well).
You do not have the required permissions to view the files attached to this post.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
The heart and soul of my brew room have arrived!! Can brew 5 gal batches inside now!
You do not have the required permissions to view the files attached to this post.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label
-
Jeremy Dunn
- Brewmaster
- Posts: 518
- Joined: Sun Feb 15, 2009 12:08 pm
- Location: Evansville, IN
Re: How about an Equipment Thread?!
nice, I was just researching induction cooktops. That's the 3500W model, right? Keep us updated on how that works out for ya.
Jeremy Dunn
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
Jeremy, yes this is the 3500W. I've been brewing on an 1800W induction plate with a 5 gal kettle for awhile now, and love it. I just wanted to be able to brew 5 gal batches inside. I just so happen to have 240V already in my brew room. 
This seems to be a tried and true induction/kettle combo on Homebrewtalk.com.
This seems to be a tried and true induction/kettle combo on Homebrewtalk.com.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label
-
wuertzBräu
- Brewmaster
- Posts: 685
- Joined: Thu Apr 30, 2015 8:40 am
Re: How about an Equipment Thread?!
That's awesome. My kettle and mash tun are induction ready, so I've considered doing that as well but I don't have another 240v power outlet. Could always unplug the dryer on brew day I suppose!
Josh Wuertz • 2018 OVHA President
Brewer • Haynie's Corner Brewing Co. • 2020-2022
Brewer • Haynie's Corner Brewing Co. • 2020-2022
-
wuertzBräu
- Brewmaster
- Posts: 685
- Joined: Thu Apr 30, 2015 8:40 am
Re: How about an Equipment Thread?!
Have we ever had an anti-tech topic?Josh Wuertz • 2018 OVHA President
Brewer • Haynie's Corner Brewing Co. • 2020-2022
Brewer • Haynie's Corner Brewing Co. • 2020-2022
-
Dutch
- Brewmaster
- Posts: 1248
- Joined: Wed Jul 11, 2007 8:54 pm
- Location: Evansville
Re: How about an Equipment Thread?!
A couple people have asked me about a base for the medical oxygen cylinders since they are top heavy and tend to very easily fall over and damage gauges etc. Unlike propane, O2 is simply a compressed gas ( i.e. no liquid) so you can simply lay the 02 bottle down when oxygenating without any danger.
Dutch deHaan • OVHA Board Member
Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?
Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?
-
sstrait
- Brewmaster
- Posts: 106
- Joined: Thu May 23, 2013 8:54 am
- Location: Newburgh, IN
- Contact:
Re: How about an Equipment Thread?!
I saw today that Adventures in Homebrewing has $39 used 5 gallon ball lock kegs. Or you could get four for $156.
Pin locks are going for $29 for a single or $100 for four. It's a real decent price for an introduction to kegging.
Pin locks are going for $29 for a single or $100 for four. It's a real decent price for an introduction to kegging.
Steve Strait • OVHA Board Member
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
Moved the garage hoist into the basement. Life is good!
You do not have the required permissions to view the files attached to this post.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label
-
msjulian
- Brewmaster
- Posts: 1665
- Joined: Sat Jul 05, 2008 5:01 pm
- Location: Newburgh, IN
-
msjulian
- Brewmaster
- Posts: 1665
- Joined: Sat Jul 05, 2008 5:01 pm
- Location: Newburgh, IN
Re: How about an Equipment Thread?!
Spent a little time this morning swapping out the quick release fittings on the hoses. Going to take a bit of getting used to but I think the extra flow is worth it.
You do not have the required permissions to view the files attached to this post.
Michael Julian
-
Jam095
- Brewmaster
- Posts: 784
- Joined: Fri Apr 27, 2012 9:48 pm
- Location: Boonville, IN
Re: How about an Equipment Thread?!
On sale at Menards right now for $9.99! Almost half off! These are great for BIAB.
You do not have the required permissions to view the files attached to this post.
John Mullins
Don’t judge a beer by it’s label
Don’t judge a beer by it’s label