Materials available to Club Members

User avatar
Dutch
Brewmaster
Posts: 1166
Joined: Wed Jul 11, 2007 8:54 pm
Location: Evansville

Materials available to Club Members

Post by Dutch » Wed Jun 19, 2013 12:23 pm

Just wanted to recap what I have for club members.
These items are essentially at cost [or significantly less]
Oxygen system - includes tank[full], tank handle, regulator, 7' tubing with ends - $40
Oxygen refills - have a number of bottles $$?
0.5 micron stone - presently out of these
Stainless tubing for stone - approximately 24" to oxygenate more effectively $3
Static Igniters - varying arrangements [battery operated] including wire and electrode $20
Dip sticks - club donation
Mash Paddles - $20
In about 2 months I will have grain mills
Welding services [stainless] are available as well
Temperature controllers - 1 deg C regulation with 10Amp compressor capacity prewired $25 [will need notice]
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?

Savage
Maltster
Posts: 46
Joined: Sun Jul 08, 2012 9:18 pm

Re: Materials available to Club Members

Post by Savage » Wed Jun 19, 2013 3:00 pm

I would like to get an oxygen system. Can you bring it to the meeting next week?
Darren Savage
Up next: Barleywine
Lagering: EDS Performance Enhancing Lager
On Tap: Vanguard Wheat, Breakfast Stout, Amber Ale, Pale Ale
Also Aging: Pretty Ducks English Ale

User avatar
Don
Brewmaster
Posts: 1759
Joined: Wed Mar 07, 2007 7:18 pm
Location: Dark Side of the Moon

Re: Materials available to Club Members

Post by Don » Thu Jun 20, 2013 9:48 pm

We need to set Dutch up a PayPal account (to help support his traveling habits).
Don Heisler

-------------------------
Brewers make wort, yeast make beer, God is good.

User avatar
Don Armstrong
Brewmaster
Posts: 139
Joined: Thu Feb 25, 2010 3:35 pm
Location: Evansville, North Side

Re: Materials available to Club Members

Post by Don Armstrong » Mon Jun 24, 2013 11:24 pm

Would like to get a stone & tube when you get more.
If your beer doesn't come out exactly right, call a brew-over!

User avatar
n_ferrell
Brewmaster
Posts: 211
Joined: Mon Oct 03, 2011 7:36 am

Re: Materials available to Club Members

Post by n_ferrell » Tue Jun 25, 2013 8:01 am

I would be interested in a mash paddle. Will you be at the June meeting?

Nathan Ferrell
Nathan Ferrell • OVHA Secretary

User avatar
Dutch
Brewmaster
Posts: 1166
Joined: Wed Jul 11, 2007 8:54 pm
Location: Evansville

Re: Materials available to Club Members

Post by Dutch » Tue Jun 25, 2013 12:14 pm

I'll bring items to June Meeting
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?

Savage
Maltster
Posts: 46
Joined: Sun Jul 08, 2012 9:18 pm

Re: Materials available to Club Members

Post by Savage » Wed Jun 26, 2013 11:47 am

I would also like to get one of the ss tubes
Darren Savage
Up next: Barleywine
Lagering: EDS Performance Enhancing Lager
On Tap: Vanguard Wheat, Breakfast Stout, Amber Ale, Pale Ale
Also Aging: Pretty Ducks English Ale

User avatar
KennyPurcell
Brewmaster
Posts: 447
Joined: Sat Oct 01, 2011 1:06 pm

Re: Materials available to Club Members

Post by KennyPurcell » Wed Jun 26, 2013 5:25 pm

I would like a ss tube as well if it is not too late to ask.
Kenny Purcell • Former OVHA President (2016)

Up Next:
Fermenting/Aging: Citra/Amarillo DIPA
On Tap: Cider, Dry Stout, 2016 OVHA Barrel Aged RIS & OMDG
Bottled: Squatch Crotch American Imperial Stout 2014, 2014 OVHA FES, Ass Crack of Don Bourbon Stout (Don't drink and name your beers), Giraffe Head Coffee Stout, & 2013 OVHA Barrel Aged Old Ale, St. Cyril's Strong Ale

User avatar
Dutch
Brewmaster
Posts: 1166
Joined: Wed Jul 11, 2007 8:54 pm
Location: Evansville

Re: Materials available to Club Members

Post by Dutch » Mon Jul 08, 2013 2:39 pm

There were some people who wanted oxygen systems at our last meeting who may not have gotten on my list. Please reply to this thread if you are in need as I have a limited amount of oxygen bottles and regulators. Be specific with regard to oxygen bottles, oxygen tubing, stainless dip tube, stones, regulators, etc.
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?

User avatar
Jam095
Brewmaster
Posts: 604
Joined: Fri Apr 27, 2012 9:48 pm
Location: Boonville, IN

Re: Materials available to Club Members

Post by Jam095 » Mon Jul 08, 2013 5:08 pm

I would like a ss dip tube please. Thanks.
John Mullins • OVHA Vice President

Don’t judge a beer by it’s label

User avatar
Dutch
Brewmaster
Posts: 1166
Joined: Wed Jul 11, 2007 8:54 pm
Location: Evansville

Re: Materials available to Club Members

Post by Dutch » Thu Jul 18, 2013 6:24 am

Came across a good bunch of oxygen bottles in Atlanta that my Brother-in-law picked up for the club. Bonus was - they were already full. This would have gotten them in big trouble if they were shipped and discovered.
Also made up a bunch of simple plastic pipe protectors for stone and SS tube combos.
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?

User avatar
msjulian
Brewmaster
Posts: 1503
Joined: Sat Jul 05, 2008 5:01 pm
Location: Newburgh, IN

Re: Materials available to Club Members

Post by msjulian » Thu Jul 25, 2013 5:01 pm

Dutch,

I need a bottle and regulator. Do the regulators have a hose barb? I already have a ss tube and stone. Do you have flow meters to measure the amount of o2 pumped in to the wort?
Michael Julian

Blancaster
Brewmaster
Posts: 264
Joined: Thu Mar 21, 2013 9:56 pm

Re: Materials available to Club Members

Post by Blancaster » Thu Aug 15, 2013 6:42 am

You mentioned grain mills, how much would those cost?
Brandon Lancaster • OVHA Board Member

User avatar
Dutch
Brewmaster
Posts: 1166
Joined: Wed Jul 11, 2007 8:54 pm
Location: Evansville

Re: Materials available to Club Members

Post by Dutch » Thu Aug 15, 2013 8:20 am

Grain Mills are in the process of parts machining. I will be out of pocket from now until Aug 23rd. Then gone again the first three and a half weeks of September.
We have not set a price for these yet pending cost to manufacture but I would think they would be in the $50 range?
We had also talked of making one a "loaner" to club members as a trial rather than having to buy one and rarely use it?
Either way I don't see them coming available before Thanksgiving?
Dutch deHaan • OVHA Board Member


Twenty-four hours in a day, twenty-four beers in a case - COINCIDENCE?

Blancaster
Brewmaster
Posts: 264
Joined: Thu Mar 21, 2013 9:56 pm

Re: Materials available to Club Members

Post by Blancaster » Thu Aug 15, 2013 10:06 am

Thanks for the update!
Brandon Lancaster • OVHA Board Member

Post Reply