Oxygen Regulators and bottles

Dutch · Post by **Dutch** » Sun Apr 22, 2012 5:12 pm

I may have a reasonable bit of access to some small O2 bottles - medical type [look around 3 lb?] some are partially filled.
Also, may have access to medical regulators 0.5 LPM onward.

JohnD · Post by **JohnD** » Sun Apr 22, 2012 7:07 pm

I might be interested. Keep me posted.
John

Michael Erwin · Post by **Michael Erwin** » Mon Apr 23, 2012 8:53 am

Me too.

sirgiovanni · Post by **sirgiovanni** » Mon Apr 23, 2012 9:01 am

*raises an eyebrow*

Don · Post by **Don** » Mon Apr 23, 2012 9:22 am

I could use a regulator.

Dutch · Post by **Dutch** » Wed May 02, 2012 7:37 pm

Perhaps two additional bits of very good news.
1] I believe that I can get a number of bottles - a local friend has a bunch!
2] I also believe that I can get them filled/refilled for virtually nothing from a welding company who has bulk oxygen.
I will need to make a refill jig with a high-pressure line but no biggie!
Another comment is that I picked up a bunch of regulators for medical type three prong bottles [the ones my friend has a bunch of]. They all have flow settings from 0.5 lpm - 7 lpm?
I'll bring one to BIG BREW!!
May need some special washers but again - no biggie.

Michael Erwin · Post by **Michael Erwin** » Thu May 03, 2012 1:43 pm

Dutch wrote:Perhaps two additional bits of very good news.
1] I believe that I can get a number of bottles - a local friend has a bunch!
2] I also believe that I can get them filled/refilled for virtually nothing from a welding company who has bulk oxygen.
I will need to make a refill jig with a high-pressure line but no biggie!
Another comment is that I picked up a bunch of regulators for medical type three prong bottles [the ones my friend has a bunch of]. They all have flow settings from 0.5 lpm - 7 lpm?
I'll bring one to BIG BREW!!
May need some special washers but again - no biggie.

Go Dutch!

msjulian · Post by **msjulian** » Thu May 03, 2012 6:18 pm

I would be interested keep me posted...

SkyBrew · Post by **SkyBrew** » Sat May 05, 2012 10:25 am

I want one!

Don · Post by **Don** » Sat May 05, 2012 6:20 pm

Sweat!

Dwayne_Delaney · Post by **Dwayne_Delaney** » Sat May 05, 2012 7:33 pm

Count me in.

Thank you Dutch.

Dutch · Post by **Dutch** » Thu May 17, 2012 5:13 am

Progress to report
I now have a bunch of regulators - they need to be checked out but I have a bunch.
I also now have a refil rig which I will test hopefully next week
I have three bottles [at least partialy filled]
I have the necessary "crush" washers from Freedom Medical
I have tubing and outlet fittings
The first three posts [after Don] will get reduced price bottles - not sure what yet but in the range of $5
Regulators with tubing and fittings $20
I have also gotten 8 more bottles [which will be filled] - these will be $20 each

ArtCox · Post by **ArtCox** » Thu May 17, 2012 6:37 am

"Raises Hand", Me! Me! Me!.. I want one.

Don Armstrong · Post by **Don Armstrong** » Thu May 17, 2012 10:07 pm

I want one, too!

Chris Norrick · Post by **Chris Norrick** » Sun May 20, 2012 5:37 pm

Count me in too!

Sent from my iPhone using Tapatalk

OVHA Chat