Page 1 of 1
Unconditioned used ball lock kegs
Posted: Tue Apr 29, 2008 2:34 pm
by john mills
I've gotten my hands on a dozen used ball lock kegs that need to be reconditioned
. I'm certain they'll all be fine with some good cleaning, and a new set of seals. I'll bring some to the meeting April 30, and "give them away" at my cost
. If anybody is interested in starting kegging, I'd like newbies to be able to get first dibs. The more draft beer available, the better this little world will become
.
Posted: Tue May 06, 2008 7:08 pm
by Dwayne_Delaney
Thanks again John for the great deal on the kegs. Below is some information that Chris Norrick posted awhile back. I just placed my order for some of the replacement gaskets.
Chris Norrick wrote:
I would first change out all the soft gaskets. They tend to harbor flavors from cola.
http://www.mcmaster.com/
Dip tubes seals
Pack 90025K368
Double Seal Buna-N O-Ring AS568A Dash Number 109, Packs of 100 (Same as 90025K12)
$4.96
Post Rings
Pack 9396K24
Silicone O-Ring AS568A Dash Number 111, Packs of 100 (Same as 9396K6)
$11.42
Lid O-Rings
Packs 9452K218
Buna-N O-Ring AS568A Dash Number 417, Packs of 10 (Same as 9452K342)
$12.50
Posted: Sat May 10, 2008 11:44 am
by Dwayne_Delaney
Has anyone found a good(cheap) source for poppets?
B3 wants $3.99 each!
Posted: Tue May 13, 2008 9:54 am
by Davin
Poppets $2.75
http://www.chicompany.net/index.php?mai ... x&cPath=14
I had problems with their sight not taking my credit card. Ended up using GoogleCheckout to make it work.
Re: Unconditioned used ball lock kegs
Posted: Thu May 15, 2008 2:21 pm
by Michael Erwin
john mills wrote:I've gotten my hands on a dozen used ball lock kegs ...
John, just found the ovha and this website this week. Did you get rid of all the kegs, or have some left? I want to start kegging, tired of bottling.
Posted: Thu May 15, 2008 4:31 pm
by john mills
Michael,
Welcome to the website/club. Come to a meeting to see what we're all about.
I've still got 7 of the original 12. I was going to keep a few, but I believe I can get some more anyway. Just let me know how many you'd like. We can meet somewhere, or at the monthly meeting at Germania on May 28.
Posted: Thu May 15, 2008 7:51 pm
by Michael Erwin
John:
Met Jack at Turonis this week, and he turned me on to ovha. Looking forward to joining in some time. I'm a novice; extract-brewing with some specialty grains since January. I'm on my eighth and ninth batch. Anyway, I hope to make a meeting; May is out, I'm working that evening. June is a definite possibility.
In the meantime, how much are the kegs? I'd like to start with two or three. (one to make soda for the kids!)
Posted: Tue Jun 03, 2008 8:57 am
by Michael Erwin
Does anyone have an outlet post and poppet for a Corny they'd be willing to sell? I have one that's bent on top so it won't seal.