WTB : 48qt cooler with drain hole

ArtCox · Post by **ArtCox** » Sun Mar 06, 2011 1:01 pm

Anyone got an old 48qt cooler with the drain hole. I have been to Wal-Mart, Lowe's and Rural King with no luck. I am wanting to make a Mash Tun out of it for my all grain setup.

Ritchie · Post by **Ritchie** » Sun Mar 06, 2011 5:26 pm

I use a 10gal water cooler i got from R-King last summer.
inside i used a screen from the pluming department (the snake).

ritchie

BM1 · Post by **BM1** » Mon Mar 07, 2011 7:44 pm

Hay,better idea...last time I was at rural king on Morgan Avenue they had a ten gallon water cooler.I used a 48 quart cooler for a while and although it worked well and was fairly efficient,it has some configuration problems due to it's shape.It isn't adequately insulated,it's cumbersome and takes up a lot of space in the brew area,if it's not fairly level the dead space is hard to predict,etc,etc.I use my 30 qt.brew kettle now w/drain valve.It has some head space issues on some mash schedules but I work around it ok.If I were to use a cooler again it would have to be the 10 gal. water can.

Also,as a point of interest,if you want a very good braided strainer,use a 3/4" braided,flexible water heater connector.It's much bigger and more durable than the skinny ones I see most the time.

Just My Two Cents...good luck.

Don · Post by **Don** » Mon Mar 07, 2011 9:42 pm

I used a 10 gal round Gott cool for years, until I went to a converted 1/2 keg.
I started out with the braided hose (dishwasher line) then, as I had the money, went to a false bottom.

The only problem I had with the 10 gallon cooler was when I had 25# or more of grain, it would put a lot of weight on the bottom and I had some sparging problems.

I still use my round cooled a lot for small batches, 10-15 pounds of grain.
With the false bottom and my mill adjusted I would get close to 80 - 85 % efficiency quite often.

ArtCox · Post by **ArtCox** » Fri Mar 11, 2011 2:57 pm

God Love you guys, but can't you just say "No Art, I don't have one".

BM1 · Post by **BM1** » Fri Mar 11, 2011 3:49 pm

.........................................

Don · Post by **Don** » Fri Mar 11, 2011 6:44 pm

ArtCox wrote:Anyone got an old 48qt cooler with the drain hole. I have been to Wal-Mart, Lowe's and Rural King with no luck. I am wanting to make a Mash Tun out of it for my all grain setup.

"No Art, I don't have one"

BM1 · Post by **BM1** » Mon Mar 14, 2011 2:45 pm

I was at Rural King on E. Morgan Avenue in Evansville,IN. today and saw a 10 gallon water cooler there for ~ $46.00.These are ideal for a 10 gallon MLT.

ArtCox · Post by **ArtCox** » Mon Mar 21, 2011 4:19 pm

GOT ONE. Sears for $8.95

OVHA Chat

WTB : 48qt cooler with drain hole

WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole

Re: WTB : 48qt cooler with drain hole