Page 1 of 1
Check out this thing I built
Posted: Mon Jun 02, 2014 12:25 am
by SkyBrew
Dwayne was my inspiration on this. It's a portable draft tower!
Re: Check out this thing I built
Posted: Mon Jun 02, 2014 10:47 am
by Jam095
Awesome!
Re: Check out this thing I built
Posted: Mon Jun 02, 2014 11:44 am
by KennyPurcell
Could you post a parts list? I'm thinking that I need one of these in my life.
Re: Check out this thing I built
Posted: Mon Jun 02, 2014 3:09 pm
by SkyBrew
yea mostly I used this BYO article
https://byo.com/stories/issue/item/2407 ... raft-tower
Tools:
Drill with 1⁄2-inch (1.3-cm) hole saw bit
and a 1/2" paddle blade bit for drilling into the cooler
PVC pipe cutter tool (or a hack saw or hand saw)
Flat Head Screw Driver
I used a paintball gun CO2 tank so I need an adaptor for the regulator that I got from midwest supplies
The Adapter CO-2-GO 8002 $13.49
Tower Shank Assembly, Chrome 5903 $15.99
Chrome Faucet with Brass Lever 5369 $15.99
1 3-inch (7.6 cm) diameter PVC pipe (commonly sold in 2-foot/61 cm lengths)
2x 3-inch (7.6 cm) PVC end cap (slip fitting)
1 U.S. standard floor-mount toilet flange (4-inch exterior/3-inch interior diameter)
Rustoleum semi gloss black prime/paint adhears to plastic
5 Gallon Menards Water Cooler
CO2 Regulator
Gas Hose
Liguid Hose
Gas Disconnect
Liquid Disconnet
4 stainless worm gear hose clamps for attaching the hose to the shank, disconnects, and regulator
Re: Check out this thing I built
Posted: Mon Jun 02, 2014 5:48 pm
by Dutch
I wonder if an oxygen regulator could be adapted - I've got a lot of them.
Re: Check out this thing I built
Posted: Sat Jun 07, 2014 1:24 pm
by Dwayne_Delaney
Very Nice!