Bottle Conditioning

Post Reply
User avatar
ArtCox
Brewmaster
Posts: 334
Joined: Sun Jan 09, 2011 3:13 pm
Location: Madisonville, Ky

Bottle Conditioning

Post by ArtCox » Sat Jan 15, 2011 8:31 am

I bottled my Irish Red Ale earlier in the week. I tried one last night, mild carbonation but not much flavor. How long would you guys think I should wait to try a second one?
"If you can't stand the hops, get out of the brewhouse!"

Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,

User avatar
Don
Brewmaster
Posts: 1768
Joined: Wed Mar 07, 2007 7:18 pm
Location: Dark Side of the Moon

Re: Bottle Conditioning

Post by Don » Sat Jan 15, 2011 9:05 am

Bottle condition for at least 2 to 3 weeks at 70º. If it's colder, it'll take longer, too cold and they may never.
Open 1 every several days and you will know when it's ready. If the sugar was keep stirred up well in the bottling bucket they will all be ready at the same time.
I have found that if they are sitting on a concrete floor, that will take away several degrees.
Put them up off of the cold floor helps, keep them as close to 70 as possible and drink one of our other brews.

And if I remember correctly lighter beers take longer than heaver beers.
Don Heisler

-------------------------
Brewers make wort, yeast make beer, God is good.

psfred
Brewmaster
Posts: 162
Joined: Thu Feb 23, 2006 8:37 pm
Contact:

Re: Bottle Conditioning

Post by psfred » Mon Jan 24, 2011 10:13 pm

I never seem to be able to wait very long, but two weeks at 70F is the rule of thumb. Ale yeasts tend to be pretty much dormant below 60F, and right now the basement isn't much warmer than that, so my last batch is still cloudy and flat.

Quick and dirty way to tell is to hold a bottle up to the light. If it's crystal clear, it's probably ready. If it's cloudy or only clear on top, the yeast is still busy and it will be flat and too sweet.

Peter

User avatar
john mills
Brewmaster
Posts: 1378
Joined: Mon Jun 25, 2007 2:40 pm
Location: Near the Zoo

Re: Bottle Conditioning

Post by john mills » Tue Jan 25, 2011 12:17 pm

Here's a trick I've learned about bottle conditioning. When bottling, bottle a beer in a cleaned and sanitized clear plastic soda bottle. You will be able to judge carbonization levels by feeling how squishy the bottle sides are. You can see through the bottle to tell clarity. It will be the first bottle drank, so oxidation is minimized. But just like all beer keep away from light. No need to worry about the plastic bottle pressure. They handle way more than glass.
You gonna buy one, or be one?
.....I'm gonna be one!

User avatar
BM1
Brewmaster
Posts: 378
Joined: Wed Jan 30, 2008 11:40 pm
Location: Evansville,IN

Re: Bottle Conditioning

Post by BM1 » Wed Jan 26, 2011 10:28 pm

When bottling, bottle a beer in a cleaned and sanitized clear plastic soda bottle.
You will be able to judge carbonization levels by feeling how squishy the bottle sides are.
I have a few clear bottle that I use that way (Corona,Samuel Smith,etc.).Didn't think about plastic ones so I could tel by squeezing them.Thanks John.
You gonna stop whinin' 'bout that beer,or you gonna send it to me?
Friends don't let friends brew drunk!
Signed:Steve Sluder.

User avatar
ArtCox
Brewmaster
Posts: 334
Joined: Sun Jan 09, 2011 3:13 pm
Location: Madisonville, Ky

Re: Bottle Conditioning

Post by ArtCox » Mon Mar 14, 2011 7:44 pm

The Irish Red Ale, I bottled back in Jan. that I am holding a few bottles back for this months meeting is really clear in the brown bottles I used, 3 months in the bottle. I may have to try one to find out.
"If you can't stand the hops, get out of the brewhouse!"

Next Brew:
Primary:
Secondary: Seven C's of Rye
Bottled:
On Tap: SMaSH Mouth Vinnie
Upcoming Brews: Gumball Machine, Lil Irish Redhead, "Fat Bastard" Heavy Scottish Ale, Bonzai Rye,

Post Reply